ADTRAN Stub Routing Spécifications télécharger pdf (Page 515)

100

101

Command Reference Guide Loopback Interface Configuration Command Set

snmp trap link-status

Use the snmp trap link-status to control the SNMP variable ifLinkUpDownTrapEnable (RFC 2863) to

enable (or disable) the interface to send SNMP traps when there is an interface status change. Use the no

form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all interfaces except virtual frame relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), E1 (e1 1/1), DSX-1 (t1

1/2), serial (ser 1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1),

SHDSL (shdsl 1/1), and loopback interfaces.

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the loopback interface:

(config)#

interface loopback 1

(config-loop 1)#

no snmp trap link-status

1 2 ... 510 511 512 513 514 515 516 517 518 519 520 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 515

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing