ADTRAN Stub Routing Spécifications télécharger pdf (Page 183)

100

101

Command Reference Guide Global Configuration Mode Command Set

ip dhcp-server excluded-address <start ip> <end ip>

Use the ip dhcp-server excluded-address command to specify IP addresses that cannot be assigned to

DHCP clients. Use the no form of this command to remove a configured IP address restriction.

Syntax Description

Specifies the lowest IP address (using dotted decimal notation) in the range OR a

single IP address to be excluded.

*Optional

Specifies the highest IP address (using dotted decimal notation) in the range. This

field is not required when specifying a single IP address.

Default Values

By default, there are no excluded IP addresses.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 2.1 Command was introduced

Functional Notes

The ADTRAN OS DHCP server (by default) allows all IP addresses for the DHCP pool to be assigned to

requesting clients. This command is used to ensure that the specified address is never assigned by the DHCP

server. When static addressed hosts are present in the network, it is helpful to exclude the IP addresses of the

host from the DHCP IP address pool. This will avoid IP address overlap.

Usage Examples

The following example excludes an IP address of 172.22.5.100 and the range 172.22.5.200 through

172.22.5.250:

(config)#

ip dhcp-server excluded-address 172.22.5.100

(config)#

ip dhcp-server excluded-address 172.22.5.200 172.22.5.250

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 183

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing