ADTRAN Stub Routing Spécifications télécharger pdf (Page 333)

100

101

Command Reference Guide DDS Interface Configuration Command Set

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable that enables (or disables) the

interface to send SNMP traps when there is an interface status change (ifLinkUpDownTrapEnable of RFC

2863). Use the no form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all supported interfaces except virtual

frame relay interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), DSX-1 (t1 1/2), serial

(ser 1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1), and

SHDSL (shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the DDS interface:

(config)#

interface dds 1/1

(config-dds 1/1)#

no snmp trap link-status

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 333

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing