ADTRAN Stub Routing Spécifications télécharger pdf (Page 362)

100

101

Serial Interface Configuration Command Set Command Reference Guide

ignore dcd

Use the ignore dcd command to specify the behavior of the serial interface when the Data Carrier Detect

(DCD) signal is lost. Use the no form of this command to return to the default value.

Syntax Description

No subcommands.

Default Values

By default, the serial interface does not ignore a change in status of the DCD signal.

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode

Command History

Release 1.1 Command was introduced

Functional Notes

When configured to follow DCD (default condition), the serial interface will not attempt to establish a

connection when DCD is not present. When configured to ignore DCD, the serial interface will continue to

attempt to establish a connection even when DCD is not present.

Usage Examples

The following example configures the serial interface to ignore a loss of the DCD signal:

(config)#

interface serial 1/1

(config-ser 1/1)#

ignore dcd

1 2 ... 357 358 359 360 361 362 363 364 365 366 367 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 362

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing