ADTRAN Stub Routing Spécifications télécharger pdf (Page 41)

100

101

Command Reference Guide Enable Mode Command Set

copy tftp <destination>

Use the copy tftp command to copy a file located on a network Trivial File Transfer Protocol (TFTP)

server to a specified destination.

Syntax Description

Specifies the destination of the file copied from the TFTP server.

Valid destinations include:

flash

(FLASH memory),

startup-config

(the

configuration file stored in NVRAM), or

running-config

(the current running

configuration file).

After entering copy tftp and specifying a destination, the ADTRAN OS prompts for the following

information:

Address of remote host:

IP address of the TFTP server.

Source filename:

Name of the file to copy from the TFTP server.

Destination filename:

Specifies the filename to use when storing the copied file to FLASH memory.

(Valid only for the

copy tftp flash

command.)

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Command History

Release 1.1 Command was introduced

Usage Examples

The following example copies myfile.biz from the TFTP server (10.200.2.4) to flash memory and labels it

newfile.biz:

copy tftp flash

Address of remote host?

10.200.2.4

Source filename

myfile.biz

Destination filename

newfile.biz

Initiating TFTP transfer...

Received 45647 bytes.

Transfer Complete!

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing