ADTRAN Stub Routing Spécifications télécharger pdf (Page 380)

100

101

SHDSL Interface Configuration Command Set Command Reference Guide

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable ifLinkUpDownTrapEnable (RFC

2863), which enables (or disables) the interface to send SNMP traps when there is an interface status

change. Use the no form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all interfaces (except virtual frame

relay interfaces).

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), DSX-1 (t1 1/2), serial

(ser 1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1), and SHDSL

(shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Release 3.1 Command was extended to the SHDSL interface

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the SHDSL interface:

(config)#

interface shdsl 1/1

(config-shdsl 1/1)#

no snmp trap link-status

1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 380

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing