ADTRAN Stub Routing Spécifications télécharger pdf (Page 413)

100

101

Command Reference Guide Frame Relay Sub-Interface Config Command Set

access-policy <policyname>

Use the access-policy command to assign a specified access policy for the inbound traffic on an interface.

Use the no form of this command to remove an access policy association.

Configured access policies will only be active if the ip firewall command has been entered

at the Global Configuration Mode prompt to enable the ADTRAN OS security features. All

configuration parameters are valid, but no security data processing will be attempted

unless the security features are enabled.

Syntax Description

Alphanumeric descriptor for identifying the configured access policy (all access

policy descriptors are case-sensitive)

Default Values

By default, there are no configured access policies associated with an interface.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), PPP virtual interfaces (ppp 1), and

frame relay virtual sub-interfaces (fr 1.20).

Command History

Release 2.1 Command was introduced

Functional Notes

To assign an access policy to an interface, enter the Interface Configuration Mode for the desired interface and

enter

access policy

<policy name>.

Usage Examples

The following example associates the access policy

UnTrusted

(to allow inbound traffic to the Web server) to

the frame relay sub-interface labeled 1.16:

Enable the ADTRAN OS security features:

(config)#

ip firewall

1 2 ... 408 409 410 411 412 413 414 415 416 417 418 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

ADTRAN Stub Routing Spécifications Page 413

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ADTRAN Stub Routing