ADTRAN IPR-S1000 Manuel d'utilisateur télécharger pdf (Page 29)

Configuring the IPR-S1000

4) With the «+» or «-» key, set the IP address.

5) Confirm the selection by pressing the «down» arrow.

14. Profiles

Note: # is always followed by a profile name. * indicates that the

profile is the startup profile.

141. Save

This screen allows you to save the current configuration under a new

profile name.

1) In the «1. Set config» menu, select «14. Profiles».

2) Enter that menu by pressing the «right» arrow.

3) Select «141. Save», and enter that menu by pressing the «right»

arrow.

Example:

4) With the «+» or «-» key, enter the profile name.

5) Confirm the value by pressing the «down» arrow.

142. Fact profile

This screen allows you to load the factory profile or to set it as the

startup profile.

1) In the «1. Set config» menu, select «14. Profiles».

2) Enter that menu by pressing the «right» arrow.

3) Select «142. Fact profile», and enter that menu by pressing the

«right» arrow.

Example:

IP address:

192.168.043.048/24

Profiles

141. Save

142. Fact. profile

143. TFTP load

144. TFTP save

Profile name:

_ _ _ _ _ _ _ _ _ _

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 107 108

Pas de commentaire

ADTRAN IPR-S1000 Manuel d'utilisateur Page 29