ADTRAN IPR-S1000 Manuel d'utilisateur télécharger pdf (Page 27)

Configuring the IPR-S1000

4) With the «+» or «-» key, fill in one or two fields (IP address type field).

5) Confirm the values by pressing the «down» arrow.

135. Bridging

A bridge is a product that connects a local area network (LAN) to

another local area network that uses the same protocol.

This screen allows you to select a bridging mode (affects both Unicast

and Multicast).

1) In the «1. Set config» menu, select «13. IP».

2) Enter that menu by pressing the «right» arrow.

3) Select «135. Bridging», and enter that menu by pressing the «right»

arrow.

Example:

4) With the «+» or «-» key, select a mode.

5) Confirm the selection by pressing the «down» arrow.

136. ICMP redirect

Internet Control Message Protocol.

This screen allows you to enable or disable the ICMP redirect

functionality.

1) In the «1. Set config» menu, select «13. IP».

2) Enter that menu by pressing the «right» arrow.

3) Select «136. ICMP redirect», and enter that menu by pressing the

«right» arrow.

Example:

4) With the «+» or «-» key, select «Yes» or «No».

DNS 1: 000.000.000.000

DNS 2: 000.000.000.000

Bridging traffic:

Bridge only

Analyse & bridge

ICMP redirect:

Yes

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 107 108

Pas de commentaire

ADTRAN IPR-S1000 Manuel d'utilisateur Page 27