ADTRAN IPR-S1000 Manuel d'utilisateur télécharger pdf (Page 18)

Configuring the IPR-S1000

3) Select «111. LNB», and enter that menu by pressing the «right»

arrow.

Example:

4) With the «+» or «-» key, select a band.

5) Confirm the selection by pressing the «down» arrow.

112. Frequency

This screen allows you to enter the DVB carrier frequency.

1) In the «1. Set config» menu, select «11. DVB».

2) Enter that menu by pressing the «right» arrow.

3) With the «down» arrow select «112. Frequency», and enter that

menu by pressing the «right» arrow.

Example:

4) Enter a value using the same method that you used to set the IP

address.

Note: The frequency must be bounded by LNB limits, otherwise the

value will be rejected.

5) Confirm the value by pressing the «down» arrow.

113. Bauds

This screen allows you to modify the baud rate (in thousands of

symbols per second). It is a floating point number bounded by 1000 to

45000 Kbauds values.

LNB:

High Band

Low band

Universal LNB

C-Band 3.7>4.2

C-Band 3.625>4.2

C-Band 3.4>4.2

L-Band 0.95>2.15

Frequency:

12.3790000GHz

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 107 108

Pas de commentaire

ADTRAN IPR-S1000 Manuel d'utilisateur Page 18