Adtran 1000R Series Manuel d'utilisateur télécharger pdf (Page 127)

Command Reference Guide Enable Mode Command Set

debug ip rip [events]

Use the debug ip rip command to activate debug messages associated with Routing Information Protocol

(RIP) operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet) screen.

Use the no form of this command to disable the debug messages.

Syntax Description

events Optional.

Displays only RIP protocol events.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

The debug ip rip command activates debug messages to provide information on RIP activity in the AOS.

RIP allows hosts and routers on a network to exchange information about routes.

Usage Examples

The following example activates debug messages associated with RIP activity:

>enable

#debug ip rip

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 136 137

Pas de commentaire

Adtran 1000R Series Manuel d'utilisateur Page 127