Adtran 1000R Series Manuel d'utilisateur télécharger pdf (Page 126)

Command Reference Guide Enable Mode Command Set

Usage Examples

The following is an example of debug ip ospf command results:

>enable

#debug ip ospf flood

OSPF: Update LSA: id=c0a8020d rtid=192.168.2.13 area=11.0.0.0 type=1

OSPF: Update LSA: id=0b003202 rtid=11.0.50.2 area=11.0.0.0 type=1

OSPF: Queue delayed ACK lasid=0b003202 lsartid=11.0.50.2 nbr=11.0.50.2

OSPF: Rx ACK lasid=c0a8020d lsartid=192.168.2.13 nbr=11.0.50.2

OSPF: Received LSA ACK LSA_ID=-64.-88.2.13 LSA_RT_ID=-64.-88.2.13

OSPF: Rx ACK lasid=00000000 lsartid=192.168.2.13 nbr=11.0.50.2

OSPF: Received LSA ACK LSA_ID=0.0.0.0 LSA_RT_ID=-64.-88.2.13

OSPF: Sending delayed ACK

OSPF: Update LSA: id=c0a8020d rtid=192.168.2.13 area=11.0.0.0 type=1

OSPF: Flooding out last interface

OSPF: Update LSA: id=0b003202 rtid=11.0.50.2 area=11.0.0.0 type=1

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 136 137

Pas de commentaire

Adtran 1000R Series Manuel d'utilisateur Page 126