Adtran 1000R Series Manuel d'utilisateur télécharger pdf (Page 25)

Command Reference Guide Basic Mode Command Set

traceroute <address>

Use the traceroute command to display the Internet Protocol (IP) routes a packet takes to reach the

specified destination.

Syntax Description

<address> Specifies the IP address of the remote system to trace the routes to.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example performs a traceroute on the IP address 192.168.0.1:

#traceroute 192.168.0.1

Type CTRL+C to abort.

Tracing route to 192.168.0.1 over a maximum of 30 hops

1 22ms 20ms 20ms 192.168.0.65

2 23ms 20ms 20ms 192.168.0.1

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 136 137

Pas de commentaire

Adtran 1000R Series Manuel d'utilisateur Page 25