ADTRAN TSU LT Manuel d'utilisateur télécharger pdf (Page 35)

Chapter 5 Config Menu

Use the CONFIG menus to set the TSU LT 220V operational configuration, including all of the network

interface parameters, the allocation of the DS0s, and the port parameters. This menu includes three

branches:

NETWORK (NI), UNIT, and PORT. Figure 5-1 shows the complete menu tree.

Figure 5-1. Configuration Menu Tree

NETWORK (NI) MENU

Use this menu to access the configuration of parameters associated with the network interface in the

TSU LT 220V. This branch includes six submenus (see Table 5-1 on page 36). Figure 5-2 on page 36

shows one submenu.

1) FORMAT

2) CODE

3) YEL ALRM

1) NETWORK (NI) 4) XMIT PRM

5) CLOCK SOURCE

6) SET LBO 1) POSITION

2) MODEM INIT

1) CNTRL PORT 3) DATA RATE

2) UNIT

2) ALARMS 1) TRAPS

2) CONFIG 2) OUTPUT

3) TEL NUM

1) RATE 56/64

2) CHANNELS

3) DTE TX CLK

4) START CHAN

3) PORT 5) # OF CHAN

6) DATA

7) CTS

8) DCD

9) DSR

10) INBAND

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Pas de commentaire

ADTRAN TSU LT Manuel d'utilisateur Page 35