ADTRAN NetVanta 3205 Guide d'installation télécharger pdf (Page 37)

NetVanta 3000 Series Routers Hardware Installation Guide

Wallmounting NetVanta 3000 Series Routers

NetVanta 3200

Figure 15. Wallmounting the NetVanta 3200

Instructions for Wallmounting NetVanta 3200

Step Action

1. Decide on a location for the NetVanta 3200. Keep in mind that the unit needs to be mounted at

or below eye-level so that the LEDs are viewable.

2. Prepare the mounting surface by attaching a board (typically plywood, 3/ 4" to 1" thick) to a wall

stud.

Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide

sufficient long-term stability.

3. Install two #8 PAN headscrews (1 1/ 2" or greater in length) wood screws into the mounted

board, following these guidelines and referring to Figure 15:

• Screws should be spaced horizontally, approximately 5” apart. Find exact positioning by

using the location of the two eyed insets on the bottom of the NetVanta 3200 as a guide.

• Screws should be horizontally level with each other.

• Leave approximately 1/4” of the screws protruding from the board to allow the heads of the

screws to slide into place in the unit’s keyed insets.

4. Slide the keyed insets on the bottom of the NetVanta 3200 chassis securely onto the screws.

5. Proceed to the steps given in Supplying Power to the Unit on page 40.

STAT

WAN

DBU

LNK

VPN

LAN

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

ADTRAN NetVanta 3205 Guide d'installation Page 37