ADTRAN NetVanta 3205 Guide d'installation télécharger pdf (Page 35)

NetVanta 3000 Series Routers Hardware Installation Guide

4. UNIT INSTALLATION

The instructions and guidelines provided in this section cover hardware installation topics such as

wallmounting/rackmounting the unit and installing option cards. These instructions are presented as

follows:

• Mounting Options on page 36

• Supplying Power to the Unit on page 40

• Installing Dial Backup and Network Interface Modules on page 41

For information on router configuration for a specific application, refer to the quick start documents

provided on your ADTRAN OS System Documentation CD. For details on the command line interface,

refer to the Command Reference Guide (also included on your CD).

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta 3000 Series Routers

are:

• Ethernet cable

• Network cable (module-dependent)

• DSX-1 cable (T1/FT1 + DSX-1 module only)

• DBU cable (dial backup functions require an optional DIM)

• Phillips-head screwdriver (rackmounting applications only)

To prevent electrical shock, do not install equipment in a wet location or during a

lightning storm.

Electronic modules can be damaged by static electrical discharge. Before handling

modules, wear an antistatic discharge wrist strap to prevent damage to electrical

components. Place modules in antistatic packing material when transporting or storing.

When working on modules, always place them on an approved antistatic mat that is

electrically grounded.

To access the command line interface (CLI) of the NetVanta 3000 Series Routers, you will

also need a VT100 terminal or PC with terminal emulation software and a console port

cable. Instructions on how to access the CLI are given in the Command Reference Guide

(provided on the ADTRAN OS System Documentation CD).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Pas de commentaire

ADTRAN NetVanta 3205 Guide d'installation Page 35