Adtran FE1 Manuel d'utilisateur télécharger pdf

NetVanta E1/FE1 Network Interface Module (NIM) P/N 1200868L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SPECIFICATIONS

Operatin Modes Frame Relay, Multilink Frame Relay,

PPP, Multilink PPP, HDLC

E1/FE1 Interface Supported Standards: ITU-T G.703, ITU-T G.704

(CRC-4), ITU-T G.823, ITU-T G.797

Line Rate: 2.048 Mbps ±50 PPM

FE1 Line Rate: Channelized timeslot (in multiples of

56/64 kbps)

Line Code: AMI or HDB3

Framing: FAS with optional CRC-4

Receiver Sensitivity: -30 dB

Connector: RJ-48C

Clock Source Network, internal

Diagnostics Test Pattern Generation and Detection: QRSS, 511, all

ones, all zeros

Network loopbacks

Alarm generation and detection

Network performance data (15 minutes and 24 hours)

Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024,

EN 61000-3-2, EN 61000-3-3

AS/ACIF S016, ETSI TBR 12/TBR 13

EN 60950, IEC 60950, AS/NZS 60950

Physical Dimensions: 2.75-inch W x 4.25-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

WAN-E1 DBU

INSTALLATION INSTRUCTIONS

1. Remove power from the unit.

2. Slide the option moduleinto the option slot until the module is firmly

seated against the chassis.

3. Secure the pins at both edges of the module.

4. Connect the cables to the associated device(s).

5. Complete the installation of the base unit.

6. Restore power to the unit.

NetVanta modules should be installed only in

NetVanta Series products.

WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUTS

Pin Name Description

1 R1 Receive data from the network - Ring 1

2 T1 Receive data from the network - Tip 1

3 — Unused

4 R Transmit data toward the network - Ring

5 T Transmit data toward the network - Tip

6-8 — Unused

An optional Dial Backup Interface Module (DIM) is

required for dial backup applications.

For a description of the DBU pinouts, refer to the

Quick Start Guide included with your DIM shipment.

Important: For additional details on product

features, specifications, installation, and safety,

refer to the appropriate Hardware Installation

Guide on the ADTRAN OS System Documentation

CD shipped with the base unit and available online

at www.adtran.com.

1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

NetVanta E1/FE1 Network Interface Module (NIM) P/N 1200868L1For more detailed documentation, visit us online at www.adtran.com.Quick Start Guide®Quick

Page 2 - E1/FE1 NIM COMMANDS

NetVanta E1/FE1 Network Interface Module (NIM) P/N 1200868L1For more detailed documentation, visit us online at www.adtran.com.Quick Start Guide®Quick

Commentaires sur ces manuels

Pas de commentaire

Adtran FE1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Adtran FE1. ADTRAN FE1 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Adtran FE1