Adtran Type 400 Manuel d'utilisateur télécharger pdf

Section 61212007L1-5, Issue 2

61212007L1-5B

CONTENTS

1. GENERAL.......................................................... 1

2. INSTALLATION ............................................... 1

3. CONNECTIONS ................................................ 2

4. MAINTENANCE ............................................... 3

5. WARRANTY AND CUSTOMER SERVICE... 3

FIGURES

Figure 1. T400 LP Housing ...................................... 1

Figure 2. T400 LP Housing with Cover Open ......... 2

Figure 3. T400 LP Housing Rear Panel.................... 2

TABLES

Table 1. Cable Pairs ................................................ 2

Table 2. Barrier Strip Interface Connection to Card

Edge Connector ......................................... 2

Type 400 Single Mount Housing

For Loop Powered Network Termination Units

Installation and Maintenance

• Span Powered

• Network connection via terminal barrier strip

• Customer connects to RJ-48 or barrier strip

• Durable metal enclosure

2. INSTALLATION

After unpacking the unit, inspect it for damage. If

damage is discovered, file a claim with the carrier and

then contact ADTRAN. See Warranty and Customer

Service.

The ADTRAN T400 LP housing may be mounted

using the mounting holes shown in Figure 2.

Open the cover and insert the circuit card through the

front of the housing until it snaps into the card edge

connector (J1), shown in Figure 2. After making the

interface connections and lowering and securing the

cover, the unit is ready for normal operation. Some

circuit cards may require a frame ground connection

to pin 11 or 27 of the gold finger connector. A ground

lug (L1), as illustrated in Figure 2, is provided to

connect an external frame ground wire to the unit.

Section 61212007L1-5B

Issue 2, May 2001

CLEI Code # NCM5MPSD_ _

Trademarks: Any brand names and product names included in this document are

trademarks, registered trademarks, or trade names of their respective holders.

Figure 1. T400 LP Housing

1. GENERAL

This section provides installation and maintenance

information for the ADTRAN

Type 400 (T400)

Single Mount Housing, illustrated in Figure 1.

Description

The ADTRAN T400 housing is used with a Loop

Powered (LP) Type 400 network termination unit and

is located at the customers premises. Functioning as a

point-of-demarcation, the combination housing and

circuit pack provide diagnostic and provisioning

information useful in installation and trouble isolation

procedures.

Connections are made to the unit by a screw terminal

block and an RJ-48 jack.

Document Revision History

This document has been revised to include additional

grounding information.

Features

The ADTRAN T400 LP Housing, P/N 1212007L1,

features include:

• Standalone Type-400 housing

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY.

HANDLING PRECAUTIONS REQUIRED.

1 2 3 4

Résumé du contenu

Page 1 - Installation and Maintenance

1 Section 61212007L1-5, Issue 261212007L1-5BCONTENTS1. GENERAL... 12. INSTALLATION ...

Page 2 - Connector

Section 61212007L1-5, Issue 22 61212007L1-5BTable 2. Barrier Strip Interface Connection toCard Edge ConnectorTerminal BarrierStrip (P1)DRTRTRRDRRTTT

Page 3 - 61212007L1-5B

3 Section 61212007L1-5, Issue 261212007L1-5B4. MAINTENANCEThe Model T400 LP housing does not requiremaintenance to operate properly. In case ofequip

Page 4 - 61212007L1-5B

Section 61212007L1-5, Issue 24 61212007L1-5B

Commentaires sur ces manuels

Pas de commentaire

Adtran Type 400 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Adtran Type 400. ADTRAN Type 400 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Adtran Type 400