ADTRAN AOS Version R10.1.0 Guide de dépannage télécharger pdf (Page 51)

Example Configurations

router /jointfilesconvert/366217/bgp 500

no auto-summary

no synchronization

network 0.0.0.0 mask 0.0.0.0

neighbor 65.162.109.202

no default-originate

prefix-list FILTER out

route-map DEFAULT-ROUTE-IN in

soft-reconfiguration inbound

remote-as 200

neighbor 192.168.1.2

no default-originate

next-hop-self

prefix-list DEFAULT out

soft-reconfiguration inbound

remote-as 500

ip route 0.0.0.0 0.0.0.0 192.168.1.254 30

The command clock source line is enabled by default. Therefore, this command will not

appear in the output when the show running-config command is issued.

If the AOS router is used to provide Internet access to privately addressed hosts, many to

one network address translation (NAT) needs to be configured by running the IPv4 Firewall

Wizard. Refer to Configuring Internet Access (Many to One NAT) with the Firewall Wizard

in AOS (ADTRAN’s Knowledge Base article 2185) for more information.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 83 84

Pas de commentaire

ADTRAN AOS Version R10.1.0 Guide de dépannage Page 51