ADTRAN TRACER 4206 Plan Manuel d'instructions télécharger pdf (Page 47)

TRACER 4106/4206 System Manual Section 5 User Interface Guide

>TRACER SYSTEM OPTIONS

Figure 4 shows the TRACER 4106/4206 System Options menu page. System option parameters for both

the local and remote TRACER 4106/4206 units are available through this menu page.

Figure 4. TRACER 4106/4206 System Options

>TRACER SYSTEM OPTIONS > RX POWER

Displays the approximate receiver levels (for both the local and remote units) using a series of symbols (#).

The more symbols (

#) displayed, the stronger the signal. If the link is down in either direction, and remote

end data is unavailable,

DATA NOT AVAILABLE displays in place of the symbols (#). This parameter is

display only.

>TRACER SYSTEM OPTIONS > TX POWER

Allows the transmitter levels (for both the local and remote units) to be adjusted. The current transmitter

level is displayed using a series of symbols (

#). The more symbols (#) displayed, the stronger the signal. If

the link is down in either direction, and remote end data is unavailable,

DATA NOT AVAILABLE displays in

place of the symbols (

#).

>TRACER SYSTEM OPTIONS > SITE NAME

Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 4106/4206

system.

Press <O> from any menu in the TRACER 4106/4206 VT100 menu structure to access the

TRACER System Options menu page.

Reducing the transmitter power of the remote TRACER 4106/4206 could cause the RF link

to drop, requiring a technician to manually increase transmit power through the menu

system at the remote site.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Pas de commentaire

ADTRAN TRACER 4206 Plan Manuel d'instructions Page 47