ADTRAN Stub Routing Manuel d'utilisateur télécharger pdf (Page 13)

IP Multicast Stub Routing in AOS Example Configuration

Example Configuration

In the following example, Router 1 is assumed to be a non-AOS product configured with an operating

system common to other vendors, and the

Stub Router is an AOS product. Though not shown in Figure 3

on page 12, the

Stub Router receives a default route from the peer router through whichever interface is

currently connected (primary or secondary).

OthervendorasRouter1:

ip multicast-routing

int s0.1 (PVC to the stub router, other configuration details omitted)

ip address 10.0.0.2 255.255.255.0

ip pim sparse-dense-mode

AOSasStubRouter:

ip multicast-routing

ip mcast-stub helper-address 12.1.1.1 (ip address of the media server)

int eth 0/1

ip address 10.1.0.1 255.255.255.0

ip mcast-stub downstream

ip mcast-stub helper-enabled

int eth 0/2

ip address 10.2.0.1 255.255.255.0

ip mcast-stub downstream

ip mcast-stub helper-enabled

int fr1.1 (PVC to the network router, other configuration details omitted)

ip address 10.0.0.1 255.255.255.0

ip mcast-stub upstream

dial-backup number 5551212 ppp 1

int ppp 1 (dbu to network, other configuration details omitted)

ip address negotiated

ip mcast-stub upstream

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

ADTRAN Stub Routing Manuel d'utilisateur Page 13