ADTRAN NetVanta 1224R Manuel d'utilisateur télécharger pdf (Page 4)

Step 3 – Add a New VLAN for the Public Subnet (Port)

The public VLAN will be configured in one of three different modes, (A) IP Routing with a

Static IP, (B) IP Routing using DHCP, or (C) PPPoE. DHCP is normally used when connected

to a cable modem and PPPoE is often used when connected to a DSL modem set in pass-through

or bridge mode. The following pages will show an example of each different scenario. We will

use VLAN 100 for the public VLAN and 100.100.100.2/30 as the public IP address when a

static IP address is used. When a static IP address is used, we need to make sure that a static

default route is entered on the “Route Table” page. Add a new VLAN by clicking the “VLAN”

link and then clicking the “Add a New VLAN” button.

1 2 3 4 5 6 7 8 9 ... 12 13

Pas de commentaire

ADTRAN NetVanta 1224R Manuel d'utilisateur Page 4