ADTRAN Quintum Tenor AS Manuel d'utilisateur télécharger pdf

NetVanta Unified Communications Technical Note

___________________________________________________________________________________

Installing and Configuring the Quintum

Survivable SIP Gateway

Introduction

Quintum’s Survivable SIP Gateway (SSG) serves as a signaling intermediary between local Session

Initiation Protocol (SIP) phones and the NetVanta Unified Communications Server. SSG technology

provides site survivability for branch offices in a single, integrated access solution. The SSG acts as an

outbound proxy – all IP endpoints register to the SIP server via SSG and all SIP signaling passes through

it. It is an intelligent local agent that gathers and maintains routing information for all endpoints passing

registrations and call signaling through it to the UC server.

In the event that the UC server is down, the SSG gateway takes control of the local telephony functions

and routing between the local and remote sites. The routing information is automatically obtained from

the registration and signaling information passed through the SSG acting as an outbound proxy.

1 2 3 4 5 6 ... 10 11

1 NetVanta Unified Communications Technical Note ___________________________________________________________________________________ Installing an

10 snom SIP Telephones 1. Navigate to C:\Program Files\ADTRAN\NetVanta UC Server\Data\System\PhoneTypes\snom3x0. 2. In Notepad, open template.htm.

11 Grandstream SIP Telephones 1. Navigate to C:\Program Files\ADTRAN\NetVanta UC Server\Data\System\PhoneTypes\Grandstream. 2. In Notepad, open the

2 Configuring a New Gateway Instructions for initial configuration are available in Installing and Configuring Quintum Tenor DX Gateway technical no

Page 5

3 contains configuration information that is used to enable features and options in the Tenor, such as SSG functionality. This section outlines the

Page 6

4 7. Use the CD command to change to the cfg/sys directory (this is the directory on the Tenor into which you will copy the license.dat file). Depen

5 9. From the main panel, select VoIP Configuration > SIP Signaling Group -1. The SIP Signaling Group window is displayed. 10. In the Primary S

6 14. To enable the IVR, from the main panel select Circuit Configuration > Trunk Circuit Routing Group-line. Note: This step is optional, dep

7 16. From the main menu bar, select File > Submit Changes to submit the changes to the Tenor SSG. Recording an IVR Prompt To use the Quintum In

8 13. Using an FTP program, upload this file to /ivr/English on the gateway. 14. Reboot the gateway. Configuring the Phones To configure the phones

9 5. Restart the NetVanta UC Server Application Service. a. Start > Control Panel > Administrative Tools > Services. b. Scroll down and s

Pas de commentaire

ADTRAN Quintum Tenor AS Manuel d'utilisateur